Description of the Skoda Superb Adaptive Lane Assist:

Lane Assist can tell when you stray from a lane unintentionally. This system works in conjunction with a camera to recognise lane markings on the road, including yellow lines during roadworks, traffic cones, and other roadside or lane borders.

Activate Lane Assist

Let's code

Required:

• VCDS or OBDEleven
• Control module "A5 Front Sensor"
• Control module "13 Auto Distance Regulator"

Before you start, open the hood. Otherwise, the change you made in the codings will be rejected.

1- Select Control Module "17 - Instruments"

Long Coding:

• Byte 4 - Bit 6
• Byte 11 - Bit 1

2- Select Control Module "A5 - Front Sensor" - Security Access: "20103"

Long Coding:

• Byte 05 = Bit 6 ("ACC coded")
• Byte 08 = Bit 5-7 "A0 Point_of_Intervention,late_setting_over_menu"
• Byte 09 = Bit 0-1 "03 Configuration_for_lane_departure_warning_kl15,Last_setting"
• Byte 09 = Bit 2-3 "0C Lane_Assist_system_mode,Selection_over_menu"
• Byte 09 = Bit 7 ("HC coded")
• Byte 17 = Bit 0 ("HC_messages coded")
• Byte 17 = Bit 1-3 "02 Warning_intensity,Menu"
• Byte 17 = Bit 5-7 "20 HC_Variante_1"

Adaptation:

• HCA_On_State = "Menu"
• HCA_Warning_Intensity = "Menu"
• BAP Personalization = "Not Activated"
• Point_of_Intervention(if available) = "Late"

3- Select Control Module "44 - Steering Assist" - Enter security access: "19249"

Long Coding:

• Byte 0 = Bit 4

4- Select Control Module "5F -Information Electr"

Adaptation:

• Car_Function_Adaptations_Gen2>menu_display_Lane_De parture_Warning = Set Value to “Activated”
• Car_Function_Adaptations_Gen2>menu_display_Lane_De parture_Warning_over_threshold_high = Set Value to “Activated”
• Car_Function_List_BAP_Gen2>LDW_HCA_0x19> Set Value to “Activated”
• Car_Function_List_BAP_Gen2-LDW_HCA_0x19_msg_bus> Set Value to “Terminal 15”

Yes, that's it. After the changes you will see the "Lane Assist" error in your dashboard. Lock car, wait 15-20 minutes. Get back in your car and start the engine. If you did it completely, the error should be gone. If the error is still there, check it again or revert it back. See you next guide...

CLICK ON THE LINK TO GET DISCOUNTED OBDELEVEN:
http://obdeleven.com/

MQB (Modular Transversal Toolkit) 
The Modular Transverse Toolkit (MQB) is currently Volkswagen’s most widely used technology platform. It forms the basis of a variety of models ranging from the small Polo to the large US SUV – the Atlas. All MQB models are equipped with transverse engines installed at the front. The benefits of the MQB include extraordinarily efficient use of space. As one of very few automakers, Volkswagen is able, thanks to the MQB, to offer all its conventional models with an electric powertrain, too. The Golf is an example: to date, this is the world’s first and only car offering customers a choice between petrol, diesel, CNG, electric and plug-in hybrid powertrains.

First generation MQB (2012)

The "first-generation" MQB platform underpins various vehicles from C-segment upwards.

• Audi A3 Mk3 (2013–2020)
• Audi Q2 (2016–present)
• Audi TT Mk3 (2014–present)
• SEAT León Mk3 (2012–2020)
• Škoda Octavia Mk3 (2012–2020)
• Škoda Superb Mk3 (B8) (2015–present)
• Volkswagen Arteon/CC (2017–present)
• Volkswagen Atlas/Teramont (2017–present)
• Atlas Cross Sport/Teramont X (2019–present)
• Volkswagen Golf Mk7 (2012–2020)
• Volkswagen Golf Sportsvan (2014–2020)
• Volkswagen Lamando (2014–present)
• Volkswagen Passat/Magotan (B8) (2014–present)
• Volkswagen Passat (China only) (2018–present)
• Volkswagen Touran Mk2 (2015–present)

Second generation MQB (MQB Ax; 2016)

The "second-generation" MQB debuted in 2016, which also introduces three different types of the platform grouped by size/segment. The introduction of the MQB A0 category enables the platform to be used on smaller and cheaper vehicles in the B-segment.

MQB A0

• Audi A1 Mk2 (2018–present)
• SEAT Arona (2017–present)
• SEAT Ibiza Mk5 (2017–present)
• Škoda Kamiq (global) (2019–present)
• Škoda Scala (2019–present)
• Škoda Fabia (2021–present)
• Volkswagen Nivus/Taigo (2020–present)
• Volkswagen Polo Mk6 (2017–present)
• Volkswagen T-Cross/Tacqua (2019–present)
• Volkswagen Virtus (2018–present)

MQB A0 IN

A low-cost variation of the A0 platform for the Indian market was introduced in 2019 and utilized for vehicles released from 2021.

• Škoda Kushaq (2021–present)
• Škoda Slavia (2021–present)
• Volkswagen Taigun (2021–present)
• Volkswagen Virtus (2022–present)

MQB A1

• Jetta VS5 (2019–present)
• SEAT Ateca (2016–present)
• Škoda Karoq (2017–present)
• Volkswagen Bora Mk4 (2018–present)
• Volkswagen Jetta/Sagitar/Vento Mk7 (2018–present)
• Volkswagen Lavida Mk3 (2018–present)
• Volkswagen T-Roc (2017–present)
• T-Roc Cabriolet (2020–present)
• Volkswagen Taos/Tharu (2018–present)

MQB A2

• Audi Q3 Mk2 (2018–present)
• Audi Q3 Sportback (2019–present)
• Jetta VS7 (2020–present)
• SEAT Tarraco (2018–present)
• Škoda Kodiaq (2016–present)
• Kodiaq GT (2018–present)
• Volkswagen Tayron (2018–present)
• Tayron X (2020–present)
• Volkswagen Tiguan Mk2 (2016–present)
• Tiguan Allspace/L (2017–present)
• Tiguan X (2020–present)
• Volkswagen Viloran (2020–present)

Source: wikipedia

CLICK ON THE LINK TO GET DISCOUNTED OBDELEVEN:
http://obdeleven.com/

Required:

• Computer with Esys installed or Smartphone - Tablet with BimmerCode installed.
• BMW Enet Cable. (eBay Link - $17)

BDC_BODY2 (Body Domain Controller for BimmerCode) 

Find: "FesPiaDefaultLastUserMode"

01 — Sport
02 — Sport Plus
03 — Sport Individual
04 — Comfort (Default)
05 — Comfort Plus
06 — Comfort Individual
0A — Adaptive
07 — EcoPro
08 — EcoPro Plus
09 — EcoPro Individual

Required:

• Computer with Esys & Esys Launcher installed or Smartphone - Tablet with BimmerCode installed.
• BMW Enet Cable. (eBay Link - $17) - For BimmerCode, supported OBD adapter.
• BMW "G" Chassis Car (G20,G30,G01,G11 etc)

Coding :

For Esys: DME -> Right Click -> Read Coding Data --> Edit FDL

For BimmerCode: Engine Control Unit -> Expert Mode

• Find "TCM_MSA_DEFAULT_OFF" --> New Value: “aktiv" - (Default: "not_active") -> Auto-Start-Stop set to ‘Off’ at every startup.

Do this coding if you want it to remember the last setting:

• Find "TCM_MSA_MEMORY" --> New Value: “aktiv" - (Default: "not_active") -> Auto-Start-Stop remembers if set to ‘On’ or ‘Off’ from previous shutdown.

With Trailer Assist, drivers do not need to rethink the situation when reversing with a trailer. They no longer need to turn the steering wheel to the left to move the trailer to the right, or vice versa. In general, the system also makes it easier to reverse precisely in a straight line. To reverse with a trailer, the driver starts by selecting reverse gear and presses a button to activate the system. The steering angle is then indicated on the instrument cluster. The driver can set the intended direction using the mirror adjustment switch that functions like a joystick. The car receives the steering commands given by the system and the driver only needs to operate the accelerator and brakes. The power assisted steering is automatically operated to move the trailer in the required direction.

This coding guide only applies to cars on the MQB platform. Watch what you're doing. You can permanently damage your car's ECUs. All risk is yours.

Required:

• VCDS or OBDEleven
• MQB-Based Car. (VW Golf 7, Passat B8, Skoda Octavia A7, Superb mk3, Seat Leon 5F, Audi A3 etc.) Click here for MQB Car List
• Backup Camera

CODING MANUAL:

1- Select Control Module "17 - Instruments" -> "Long Coding"

• Byte 12, Bit 5

2- Select Control Unit "10 - Park/Steer Assist" -> "Long Coding"

Security Access: 71679 or 20103 (if you get this error: Reques out of range)

• Byte 0, Bit 3

3- Select Control Unit "6C - Back-Up Cam" -> "Long Coding"

• Byte 10, Bit 3

3- Select Control Unit "5F Information Electr." -> "Adaptation"

Car_Function_Adaptions_Gen2:

• Menu_ display_trailer_assistant_ after_ disclaimer= activated
• Menu_ display_trailer_ assistant over_ threshold_high = activate

Car Function List BAP_Gen2:

• Trailer_Assistant_0x36 = activated
• Trailer_Assistant_msg_bus_0x36 = KL. 15

CLICK ON THE LINK TO GET DISCOUNTED OBDELEVEN:
http://obdeleven.com/

For Esys: HU_MGU or HU_NBT2 or HU_EntryNav -> Right Click -> Read Coding Data --> Edit FDL

For BimmerCode: HeadUnit-> Expert Mode

• Find "AKT_Auto_Lenkrad-" --> New Value: “aktiv" - (Default: "not_active")

For Esys: BDC_BODY -> Right Click -> Read Coding Data --> Edit FDL

For BimmerCode: Body Domain Controller --> Expert Mode

• Find "LHZ_CCM_IKF " --> New Value: “aktivIKF_EN" - (Default: "not_active")
• Find "IKF_ENABLE" --> New Value: “ikf_alle_size" - (Default: "not_active")